Garage Gates

A warm and safe garage

Sectional doors with a solid structure in a wide range of designs and colors. They can be cut at the edges, arched or rounded, adapted to the individual character of the houses or the building. Made of galvanized steel and powder coated, they are equipped with anticorrosion protection on both sides. Effectively protect against burglary, and 40 mm thick steel panels filled with polyurethane foam, as well as good insulation of the door on its entire surface provides excellent thermal insulation.

Comfort and safety

Thanks to the vertical opening upwards, the sectional door does not take up space on the driveway. The car can drive directly under it, which increases the level of safety, especially when the entrance to the garage is located near a busy street. The gate can be easily opened and closed by hand. It can be opened automatically with a single button. A special transmitter with a variable code or a remote control with automatic transmission of a unique code provides protection against the opening of the garage by an unauthorized person.

The comfort of operation is ensured by an optimally selected arrangement of springs and other elements. Specially profiled panels protect the fingers against trapping. Sectional doors have various types of protection, eg cable breakage and overload protection, photocells etc. Depending on various building conditions, different types of springs and guide rail types are available.

Available garage door solutions



RSC 80 Sectional garage doors

Gates with low operation are used when there is insufficient place for a gate with standard operation. Required height of a header in low operation is only 80 mm in case of manual operation and 150 mm in case of electric drive.

Product characteristics:
shaft and torsion springs installed on the back of double horizontal guides.


RSC 200 Sectional garage doors

RSC 200 normal operation is a standard and most commonly used type of garage gate operation. Required height of a header is 200 mm in case of manual gate operation and 250 mm in case of gates operated using electric drives.

Product characteristics:
shaft and torsion springs installed on a header, in front of double horizontal guides.


RSC 350 Sectional garage doors

High operation is used where it is impossible to apply RSC 200 normal operation due to excessive height of a header. In case of RES 350 operation, the height of a header in case of manual operation is 350 mm, and 400 mm when using an electric drive.

Product characteristics:
shaft and torsion springs installed on a header, in front of single horizontal guides.

Patterns and colors

No embossed areas

Single embossed area

Grooved

Other

EKOPLAST S.A. implements a project co-financed from European Funds